Operating Modes - Swisson XRC-200 Bedienungsanleitung

Below, the menu items of the XRC-200's menu are briefly described.

OPERATING MODES

SET MODE
Use the [11] up and the down arrow keys to navigate to the desired mode. By pressing the [3] OK key, the
highlighted mode is activated. The available modes are NORMAL and FAST ACCESS.
NORMAL
When the XRC-200 is started in NORMAL MODE, the user may select sequences or playlists by entering a
sequence or a playlist number using the number keys. Selected sequences or playlists may be replayed
using the
play key. In order to record to an empty sequence, the user presses the record button after entering the
number of the desired sequence. If the sequence is empty and the memory is not yet full, this causes the
recorder to prepare itself for recording. When the recorder is ready to record to a sequence, the actual
recording may be started using the play button or the DMX Recording Trigger (ADVANCED>DMX
REMOTE CONTROL).
FAST ACCESS
In fast access mode, a sequence or a playlist may be assigned to each of the number keys. By default, the
sequences 1 to 9 are mapped to the buttons 1 to 9 and the sequence 10 is mapped to the button 0. This
configuration may be changed under OPERATING MODES>FAST ACCESS CONFIG.Recording is not
possible in this mode.
FAST ACCESS CONFIG (FAST ACCESS Configuration)
In the FAST ACCESS Configuration, a table is displayed where each row of the table corresponds to one of the
number buttons on the key pad. The leftmost column references the button to which the table row corresponds.
The user may use the arrow keys to navigate within the table. When the OK key is pressed while a cell in the
second column is highlighted, a menu will show up, where an action may be selected. Available actions are
(NONE, PLAY PLAYLIST and PLAY SEQUENCE). When a cell in the rightmost column is highlighted, pressing the
OK key will display a list of sequence numbers if the action of the row of the highlighted cell is PLAY SEQUENCE.
A list of playlist numbers will be displayed if the action of the row of the highlighted cell is PLAY PLAYLIST.
DMX BACKUP
BACKUP ACTIVATION
The up and the down arrow keys are used to navigate to the desired backup activation mode. Before any of the
arrow keys have been pressed, the currently selected mode is highlighted. By pressing the cancel key, the menu
item is left and the backup activation mode stays unchanged. When the OK key is pressed, the highlighted mode is
selected. The XRC-200 supports the following backup activation modes: NEVER, DMX A FAILS,
DMX B FAILS, DMX A OR B FAILS.
NEVER
The backup activation is disabled. This is the default mode.
DMX A FAILS
The DMX backup sequence or playlist is played when the DMX universe A looses the DMX signal.
DMX B FAILS
The DMX backup sequence or playlist is played when the DMX universe B looses the DMX signal.
DMX A OR B FAILS
The DMX backup sequence or playlist is played when either or both of the universes fail.
11 English