Power Supply - Spaun Electronic SMS 5402 NF Technische Hinweise

Power Supply

The compact multiswitch has an internal energy-saving switch mode power supply.
The supply voltage range is: 100 V to 240 V~.
The supply voltage frequency may vary between 50 and 60 Hz.
Power consumption (at max. LNB current):
Power Supply to LNB
Supply mode:
12 V:
18 V:
22 kHz: The LNB inputs provide the following operating voltages:
The remote current must not exceed a total of 0.5 ampere.
The maximum permissible current per port must not exceed 0.5 ampere.
SAT standby terrestrial passive
terrestrial active
SAT active terrestrial passive
terrestrial active
The LNB inputs V Low, H Low, V High and H High provide
a voltage of 12 V for LNB powering (SMATV-LNB)
The LNB inputs V Low and V High provide
a voltage of 12 V and
the LNB inputs H Low and H High provide
a voltage of 18 V for LNB powering (Twin LNB)
V Low, H Low
12 V 18 V
2,5 W
6 W
22,5 W (LNB 500 mA)
26 W (LNB 500 mA)
V High, H High
12 V 18 V
22 kHz