Rane Zonetech Schnellstartanleitung Seite 9

Paging
You can use Zonetech's display, Info knob, and Left/Right (/) buttons to edit the paging
settings.
To view Paging settings, press the Page button.
To edit the Paging settings, use the Left/Right (/) buttons to show the previous or
next setting (respectively). Turn the Info knob to adjust the value of each setting.
Note: To control the page settings remotely, you can also use a web-based interface
on your computer (connected to the Computer Ethernet port), or an optional Rane RAD
device (e.g., RAD16z, RAD26, etc.) connected to the Pager port.
These are some of the editable pager settings which are most commonly used. The
abbreviated name (shown when the setting is not selected) is in parentheses.
Note: For the complete list of settings shown in the display and their functions, download the
full User Guide.
Input Level (Level)
This is the pager volume level: -88.0 to +12.0 dB.
This is independent of the pager's chime volume
level (see below) and independent of the Zone
level.
Chime
This determines whether the pager's chime sound
is on (Enabled) or off (Disabled). The chime will be
mixed with the paging output signal.
Tip: If this setting is on when you use the pager,
we recommend waiting a brief moment for the
chime to end before making an announcement.
Chime Level (CH Level)
This is the volume level of the pager's chime sound:
-30.0 to +12.0 dB (default: 0 dB). This is
independent of the pager's overall volume level.
9