Amibot Swip AS50 Everybot Benutzerhandbuch Seite 11

Operating the robot
Figure 2
Press the Start/Stop button on the appliance (Figure 2) or on the
remote control (Figure 3). The robot starts its cleaning cycle.
NOTES:
• Remove any objects from the floor before using the robot.
• When the robot starts, it beeps 5 times. The Start/Stop button is continuous
blue throughout the cleaning cycle.
• The Start/Stop button flashes yellow when it encounters a problem.
• The Start/Stop button turns continuous yellow if the batteries run out.
• The robot's cycle can be interrupted and it can be manually controlled using the
remote control.
Figure 3
9
EN