Cleaning Instructions - System4 0G1PE2 Bedien- Und Installationshandbuch

CLEANING INSTRUCTIONS

Since the appliance is used for preparing foods for
human consumption, special care must be paid to
everything relating to hygiene, and the appliance
and the entire surrounding environment must con-
stantly be kept clean
Important
Before starting any cleaning procedure,
disconnect the electricity supply using the
circuit-breaker and allow the appliance to
cool.
The precautions which follow are also important.
1 - Clean all parts of the appliance with warm wa-
ter, food-approved detergents and non-abra-
sive materials only.
2 - Thoroughly clean all parts which come into di-
rect or indirect contact with foods and all sur-
rounding areas.
CLEANING THE PLATE
To carry out this operation, proceed as follows.
1 - Switch the appliance off and leave it to cool.
2 - Turn off the circuit-breaker to disconnect it from
the electrical mains.
3 - Clean the plate thoroughly with a sponge and
normal detergent, rinse with plenty of water and
dry.
3 - After use, clean the accessories with a suitable
grease-remover product. If possible, wash in
the dishwasher.
Caution - warning
Never use products containing substances
harmful or hazardous for health (solvents, pe-
troleum spirits, etc.).
4 - Rinse surfaces with drinking water and dry.
5 - Take special care not to damage stainless steel
surfaces. In particular, avoid the use of corro-
sive products and do not use abrasive materials
or sharp tools.
6 - Remove the limescale deposits which may form
on some of the appliance's surfaces.
Important
Do not spray water onto the plates when
still hot as this can damage them.
4 - From time to time, after cleaning the plates, ap-
ply a small amount of linseed oil or a similar
product.
- 9 -
IT
GB
DE
FR
ES
IDM-39613300600.tif
English