Description Of Controls; Switching The Appliance On And Off; Turning Off - System4 0G1PE2 Bedien- Und Installationshandbuch

DESCRIPTION OF CONTROLS

The appliance is fitted with the controls for use of its
main functions.
A)Plate control knob: turns the plates on and off
and sets their level.
Full power marker
Front plate marker

SWITCHING THE APPLIANCE ON AND OFF

Lighting
When first using the plate, pre-heat it at full power
without a pan for around 4 minutes.
1 - Turn on the appliance's circuit breaker to con-
nect it to the electrical mains.
2 - Turn the knob (A) to position 1 to turn the plate
to full power. The mains light (B) comes on.
3 - Once the plate has pre-heated, turn the knob
(A) to one of the other settings, to reduce power
to a lower level.

Turning off

1 - Turn the knob (A) to setting 2 to switch off the
plate. The mains light (B) goes out.
2 - Turn off the appliance's circuit breaker to dis-
connect it from the electrical mains.
Off marker
A
- 7 -
B)Power indicator: indicates that the power supply
and the plate are on.
Rear plate marker
Minimum power marker
B
A
B
A
Low power marker
B
IDM-39613300400.tif
A
1
B
2
IDM-39613300500.tif
English
IT
GB
DE
FR
ES