Filling The Sealing Liquid Reservoir - FP Mailing Solutions FPi 5600 Auspacken Und Installieren

4

Filling the Sealing Liquid Reservoir

Filling the Sealing Liquid Reservoir
1. Open the front cover A.
4
2. Fill the reservoir B to the "Max" lip with sealing liquid.
3. Close the front cover A.
Before starting the job, wait approximately 5 minutes for the brushes to moisten or use
moistened brushes. For instructions on the installation of brushes, see
brushes.
If the liquid reservoir is almost empty the touchscreen shows a message to warn you that
you should refill the reservoir.
8
Clean and replace