Deltaplus EX118-Serie Bedienungs- Und Wartungsanleitung Seite 11

- At least every twelve months by the manufacturer or a competent organization, mandated by them.
PERIODIC REVIEW OF PPE:
An examination should be performed at least every twelve months by the manufacturer or a competent organization, mandated by them.
This very important check is related to the maintenance and efficacy of the PPE and hence the user's safety. A written document
authorising reuse should be obtained during this audit in order to reuse the PPE. This document will clarify that the user's safety is linked
to maintaining the efficiency and resistance of the equipment.
Replace the PPE if necessary.
In accordance with European regulations, the identification form must be completed prior to the first use of the product and then updated
and kept with the product as well as the manual by the user. The legibility of the product labelling should be checked periodically.
WARNING:
The user's safety depends on the continuing efficacy of the PPE, its strength and the proper understanding of the instructions in this
manual.
WARNING: Any static or dynamic overload may damage the PPE.
WARNING: THE ADJUSTABLE LANYARD IS NOT A GRIP BODY DEVICE, ONLY THE HARNESS IS RESERVED FOR THIS
FUNCTION (EN361). THE ADJUSTABLE LANYARD MUST NOT BE USED FOR THE PREVENTION NOR FOR THE ARREST OF
FALLS.
In the case of a fall risk, it is mandatory to implement a collective or personal protection device against falls from a height (EN363) (See
reference table).
It is dangerous to create your own fall arrest system as each safety function may interfere with another safety function.
No modification or addition or repair of the PPE may be made without prior written consent from the manufacturer without using their
procedures.
Do not use beyond the scope of use defined in the usage instructions, nor beyond its limits.
The manufacturer cannot be held liable for any direct or indirect accident after a modification or use other than that provided in this
manual.
This equipment should be used in work environments with minimum temperatures of -20°C / maximum of +50°C. (See reference table).
STORAGE INSTRUCTIONS:
During transport and storage:
- keep the product in its packaging - keep the product away from any sharp, abrasive, objects etc...
- Keep the product away from sunlight, heat, flames, hot metal, oil, petroleum products, harsh chemicals, acids, dyes, solvents, sharp
edges and structures of small diameter. These items can affect the performance of the fall arrest device.
After use, store the product in its packaging in a cool, dry, ventilated area.
INSTRUCTIONS FOR CLEANING / MAINTENANCE:
Clean with soap and water, wipe with a cloth and hang in a ventilated area to dry naturally away from any direct fire or source of heat,
even for items that got wet during use.
The metal parts are wiped with a cloth soaked in vaseline oil. Bleach and detergents are strictly prohibited.
Do not use bleach, harsh detergents, solvents, gasoline or colouring, these substances can affect the performance of the fall arrest
device.
MARKING:
- Manufacturer identification: DELTAPLUS®
- date (month / year) of manufacture, e.g. 02/2015
- The product reference EX... (See reference table).
- The batch number, e.g. 15.9999
- The indication of compliance with Directive 89/686/EEC (CE symbol)
- the number of the notified body involved in the regulation of equipment (0082 or 0333)
- the number of the standard to which the product is compliant and its year: EN...
- single size
- Length of the lanyard
As well as the pictograms: ④ Read the instruction manual before use
PERFORMANCE / COMPLIANCE:
Compliance with the essential requirements of Directive 89/686/EEC, in particular in terms of design, ergonomics and safety. Meets with
requirements and test standards EN363, EN364, EN365, EN358.
Other components: Connector or lanyard: Follow the instructions described in their own manual.
11
DELTA PLUS GROUP
B.P. 140 -ZAC de La Peyrolière
84405 APT CEDEX- FRANCE
www.deltaplus.eu
EX118 – EX021 - UI UPDATE : 12/02/2015