Signal Words; Warning Symbols; Product Specific Safety Notes - Mettler Toledo Densito Benutzerhandbuch

Signal words

WARNING
NOTICE

Warning symbols

Electrical shock

2.2 Product specific safety notes

Intended use
The density meter is designed to be used by trained staff and is intended for measuring the density of liquid
samples that are compatible with the materials with which they come into contact.
The density meter is designed for indoor and outdoor operation in dry conditions. The following site requirements
apply:
The ambient conditions are within the limits specified in the technical data.
•
No corrosive gas atmosphere
•
No explosive atmosphere
•
No powerful electric or magnetic fields
•
Any other type of use and operation beyond the limits of use stated by Mettler-Toledo GmbH without consent from
Mettler-Toledo GmbH is considered as not intended.
This device complies with Industry Canada licence-exempt RSS standard(s) and part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired operation of the device.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
Responsibilities of the instrument owner
The instrument owner is the person holding the legal title to the instrument and who uses the instrument or
authorizes any person to use it, or the person who is deemed by law to be the operator of the instrument. The
instrument owner is responsible for the safety of all users of the instrument and third parties.
METTLER TOLEDO assumes that the instrument owner trains users to safely use the instrument in their workplace
and deal with potential hazards. METTLER TOLEDO assumes that the instrument owner provides the necessary
protective gear.
Safety notes
Danger of death or serious injury due to electric shock!
Contact with parts that carry a live current can lead to death or injury.
1 Only use the METTLER TOLEDO AC adapter designed for your instrument.
2 Keep all electrical cables and connections away from liquids and moisture.
3 Check the cables and the plugs for damage and replace damaged cables and plugs.
NOTICE
Risk of damage to the instrument due to the use of unsuitable parts!
Using unsuitable parts with the instrument can damage the instrument or cause it to malfunction.
− Only use parts from METTLER TOLEDO that are intended to be used with your instrument.
4
A hazardous situation with medium risk, possibly resulting in death or severe injury if not
avoided.
A hazardous situation with low risk, resulting in damage to the instrument, other material
damage, malfunctions and erroneous results, or loss of data.
WARNING
Handheld Density Meter