Genicom 38 Serie Kurzübersicht Seite 9

Wiggle the ribbon guide onto the print head nozzle and snap it down flush.
Ribbon
Guide
Print Head
Nozzle
Find the ribbon drive spindle.
Ribbon Drive Spindle
Quick Reference Guide
The ribbon guide fits snugly between the exit rollers. Center the
ribbon guide over the print nozzle. Start with the front end of the
ribbon guide pointing slightly up and then rotate it down onto the
print head nozzle. It should snap down into place with moderate
pressure.
Flush Fit-No Gap
Look down into the printer toward the left side and notice a small
shaft sticking up vertically through a shiny plate.
Hub
Rear of Cartridge
8
GEK-89604