Testing The Printer; Installing The Ribbon - Genicom 38 Serie Kurzübersicht

TESTING THE PRINTER

Installing the Ribbon

If there is paper under the print head -
Remove the top door.
Unpack the ribbon and unwrap it.
Quick Reference Guide
The print head has to back away from the striker bar in order to
provide clearance to slide the ribbon guide onto the print head
nozzle.
The print head automatically backs away from the striker bar any
time the printer is turned on and there is no paper under the
print head.
Press the PARK/PATH key. The printer should retract the paper,
and the LCD should say Fault:Paper Out.
Top Door Removal
Hold the cartridge as shown. Take the shipping tape off the
ribbon guide and the plastic piece marked "remove" from the left
arm of the ribbon. Squeeze the ears on the ribbon guide together
and slip the ribbon guide up off the cartridge.
6
GEK-89604