Cleaning Of The Device - Quigg KZ-1223 Bedienungsanleitung

Instruction manual
use
• P our the desired volume of water into the water tank.
the number of cups can be read on the water level indicator.
• A dd the desired quantity of ground coffee. Replace the filter holder.
to switch on, press the on/off button, the coffee maker will start
working and the red pilot light will light on.
• M ake sure the carafe is placed correctly on the hotplate.
• W hen you remove the carafe from the appliance, a non-drip valve
will automatically operate to stop any drops of coffee dripping onto
the hotplate. Replacement of the carafe automatically opens the
non-drip valve and allows any remaining coffee to filter through
into the carafe.
• W ait until the brewing process is finished and the filter is empty. to
switch off the coffee machine, press the StARt button again. the
red pilot light will go off to indicate that the coffeemaker has been
switched off.
• t he carafe can remain on the hotplate, which begins to heat up as
soon as the coffeemaker is switched on. the hotplate will keep the
coffee hot until the coffeemaker is switched off (red pilot light goes off).

cleANiNg Of the device

• D ecalcifying the coffee maker prolongs its life span. For
decalcification only use products especially made for
decalcification of coffee makers.
• n ever use a dishwasher to clean the jug.
8
guideliNes fOr PrOtectiON Of
the eNvirONmeNt
this appliance should not be put into the domestic
garbage at the end of its useful life, but must be disposed
of at a central point for recycling of electric and electronic domestic
appliances. this symbol on appliance, instruction manual and
packaging puts your attention to this important issue. the materials
used in this appliance can be recycled. By recycling used domestic
appliances you contribute an important push to the protection of our
environment. Ask your local authorities for information regarding the
point of recollection.
Packaging
the packaging is 100% recyclable, return the packaging separated.
Product
this device is equipped with a mark according to the European
Directive 2002/96/EC on Waste Electrical and Electronic Equipment
(WEEE). By ensuring that this product will be correctly processed into
waste, it will help prevent possible negative consequences for the
environment and human health.
ec declaration of conformity
this device is designed, manufactured and marketed in accordance
with the safety objectives of the Low Voltage Directive "no 2006/95/
EC", the protection requirements of the EMC Directive 2004/108/EC
"Electromagnetic Compatibility" and the requirement of Directive 93/68/
EEC.