Hitachi 32HE1000 Handbuch Seite 48

Connections
Connector Type
VGA
Connection
(back)
AUDIO IN
PC/YPbPr
Audio
Connection
(side)
HDMI
Connection
(back)
Scart
Connection
(back)
YPBPR YPbPr Video
Connection
(back)
SIDE AV
Side AV
(Audio/Video)
Connection
(side)
SPDIF
SPDIF
(Optical Out)
Connection
(back)
HEADPHONE
Headphone
Connection
(side)
USB
Connection
(side)
CI
Connection
(side)
LAN
Ethernet
Connection
(back)
If you want to connect a device to the TV, make sure that both the TV and the device are turned off before making
any connection. After the connection is done, you can turn on the units and use them.
Cables
Side Audio/Video YPbPr/PC Audio
Connection Cable Cable
PC to YPbPr Connection Cable
Side Audio/Video Audio/Video
Connection Cable
LAN / Ethernet Cable
English - 12 -
Device
Cable
See the illustrations on the left
side. You can use YPbPr to VGA
cable to enable YPbPr signal via
VGA input. You cannot use VGA
and YPbPr at the same time. To
enable PC/YPbPr audio, you will
need to use the Side AV input
with a YPbPr/PC audio cable
for audio connection, using the
Side AV connection cable's Red
and White ends. If an external de-
vice is connected via the SCART
socket, the TV may automatically
switch to EXT1 mode. When
receiving DTV channels (Mpeg4
H.264, H.265) or while in Media
Browser mode, output will not
be available via the scart socket.
When using the wall mounting kit
(available from a third party in
the market, if not supplied), we
recommend that you plug all your
cables into the back of the TV
before mounting on the wall. Insert
or remove the CI module only
when the TV is SWITCHED OFF.
You should refer to the module
instruction manual for details of
the settings. The/Each USB input
of your TV supports devices up to
500mA. Connecting devices that
have current value above 500mA
may damage your TV. When con-
necting equipment using a HDMI
cable to your TV, to guarantee
ficient immunity against parasitic
frequency radiation, you have to
use a high speed shielded (high
grade) HDMI cable with ferrites.
suf-