CAME TA/600 Montage- Und Betriebsanleitung Seite 35

Configuration of general parameters of the device
When the device is in "System off" mode
the device's configuration screens B.
Note. After accessing the configuration screen, press button
to be configured. To exit the configuration window and go back to the screen in figure A wait until the
screen times out.
A
B
C
D
(page 12), holding down the
to display in sequence the parameters
Changing User profile
The device can manage the thermal preferences of two
User profiles.
For each user profile different "Comfort", "Eco" and
"Night" programs can be created for the Heating and
Cooling modes.
arrows to change the active User profile B.
Use the
Press the button to move on to the next parameter
to be configured.
Enabling the screen lock
The factory settings do not provide any protection from
changes for the device C.
To leave this setting unchanged and move on to the next
parameter, press the
If you want to protect the device from unwanted changes
to programming, use the
screen lock D.
Press the button to access the window that lets
you set the code (password) that must be entered to
unlock the device.
button A gives access to
button.
arrows to enable the