Special Settings - Mitsubishi Heavy Industries eco touch RC-EX1A Installationsanleitung

 Special settings

27
28
29
30
 Erase IU address
 CPU reset
 Restore of default setting
 Special settings
Erase IU address: Memory of the IU address for multi (KX) unit is erased.
CPU reset: Microcomputers of IU and OU connected are reset (State
of restoration after power failure).
Initializing: Settings on R/C and IU connected are initialized (State of
factory default).
Touch panel calibration: Use this to correct when the display and the touch position
are not matched.
 Erase IU address
Memory of the IU address for Multi (KX) unit is erased. This is operable from
the main R/C only and only when IUs are stopped. Tap Yes to erase IU
address
 CPU reset
All microcomputers on the R/C operated, other R/Cs, IUs and OUs are reset
(State of restoration after power failure). Tap Yes to reset CPU
 Restore of default setting
Settings on the R/C and IU connected are restored to the default setting (State
of factory default). Tap Yes to restore the default setting.
— 44 —