Akasa Integral NMAX Handbuch Seite 4

Installation
1. Open the enclosure by undoing the securing screws on the back panel
and sliding out the aluminium top cover.
2. The enclosure is compatible with IDE and SATA hard drivers and each
has it's separate connector. Please line-up your HDD with the
corresponding connector and gently push it in until the connection is secure.
SATA Connector
• 2.5" SATA HDD installation
4
HDD Installation
IDE Connector
• 2.5" IDE HDD installation
3. Ensure the top panel fits into the housing groves and slide it in while
gently pressing the HDD down.
4. Locate the back panel back in place and secure it to the housing with the screws.
HDD Installation
5