Main Components - ZOODOS 89470 Gebrauchsanweisung

Do not use for routing or milling unless the
appropriate guards are fitted above the
table, and never use for notching.
Do not use the saw for sawing items larger
than the dimensions stated under 'Cutting
capacity' in the Technical Specifications.
Replace the table insert when worn.

Main components

1. Parallel guide
2. Mounting plate for jigsaw
3. Lock knob for parallel guide
4. On/off switch
5. Long cross frame (×2)
6. Wheels
7. Axle
8. Rear bench extension
9. Blade guard
10. Saw blade
11. Mitre guide
12. Mounting plate for router
13. Side bench (×2)
14. Hand wheel for bevel adjustment
15. Overload switch
16. Short cross frame (x2)
17. Rubber feet (x4)
18. Bench insert
19. Dust extraction nozzle
20. Cross braces (x4)
21. Cleaver blade
22. Handle for side bench (x4)
23. Support for rear bench extension (x2)
24. Bevel adjustment indicator
25. Blade lock
26. Push stick
27. Spanners for blade replacement
28. Allen key
DK
NO
SE
FI
GB
DE
PL
ET
59