Connecting Both Av Player And Handset - ideus VV950 Bedienungsanleitung

VV950
8. For voice communications such as chatting over the Internet, you must
disconnect "Bluetooth AV Service", and connect "Bluetooth Headset Service".
First, right click VV950 and choose "Disconnect—>Bluetooth AV Service".
Then, right click VV950 and choose "Connect—>Bluetooth Headset Service".
9.
Once you hear indicating tones from the handsfree, press button " " to make
the connection.
After setting up the connection, from the "Control Panel" you start "Volume and
10.
Audio Device" and configure the default device to be "Bluetooth AV/HS Audio".
Now you can use handsfree's microphone to conduct voice communications.
Note that, when connecting with "Bluetooth AV Service", you can use Handsfree's buttons
to control the remote device, such as "play"," pause", select music, and control Volume up
and down But, you can't use the microphone at the handsfree side for voice
communications. On the other hand, when connecting with "Bluetooth Headset Service",
you can listen to the music and use hadsfree's microphone, However, you can't use the
handsfree to control the remote device. If you use Bluetooth windows driver other than
IVT's BlueSoleil, you may follow software vendor's user manual to complete paring and
connecting your handsfree with your USB dongle.
2.8.3

Connecting Both AV player and Handset

This product can connect with an AV player and a Bluetooth handset at the same
time.This allows you to receive and make phone calls while listening to music
Detailed operation procedures are as follows:
1. Pair your handset with the handsfree (see Section 2.5 for details) to ensure
that the handsfree has stored the pairing information of the handset. If the
handset has paired with the handsfree, you can skip this process. If the
handset automatically establishes connection with the handsfree at the end
of paring, you need press and hold button " " for 3 seconds to drop the
connection
2. Pair and connect the handsfree with your AV player (see Sections 2.7.1 and
2.7.2 for details) to enable AV mode functions.
3. Follow handset's manual to initiate the connection from the handset side
(see Section 2.5.3 for details).
While listening to music, the product will notify the user an incoming call. You can pause
the on-playing music to accept the incoming call or reject following the same button
operations specified in Section 2.6.1. After ending the call, the music playing will be
automatically. If you want to make a phone call while listening music, you can either dial a
number from phonebook or via voice dialing, the handset will also pause playing music
accordingly.
16