Quit Pairing With Bluetooth Equipment; Connecting/Disconnecting Device With Bluetooth Handset; Call Functions; Basic Call Operations - ideus VV950 Bedienungsanleitung

2.5.3

Quit Pairing with Bluetooth Equipment

When the handsfree is in the pairing mode, press button "
to quit from the pairing mode to the standby mode. The icon indicator "
disappear.
2.5.4

Connecting/Disconnecting Device with Bluetooth Handset

When the handsfree communicates with a Bluetooth equipment with Handsfree Profile, the
Bluetooth connection between two equipments shall be established in advance. If two
Bluetooth equipments have been paired recently, you can simply reconnect them.
Connecting Device with Bluetooth Handset
If the handsfree and the handset have been paired, to connect them, you can either quick
press handsfree's button "
guide to find the handsfree and send a connection request from the handset. During
connecting, the connecting icon indicator "
connecting, you will hear a connection successful tone, and icon indicator "
replaced by icon indicator "
Disconnecting Device with Bluetooth Handset:
When connected, you can press and hold button "
or you can follow the handset's manual to remove connection from the handset side.
When disconnection is completed, you will hear a disconnection successful tone and icon
indicator " " will disappear.
2.6

Call Functions

2.6.1

Basic Call Operations

Answer Call: Press button " ."
Reject Call: Press and hold button "!" for 3 seconds.
End Call: Press button " ".
Redial: Press and hold button " "for 3 seconds.
Note that, for product model VV950 with simultaneous two-link feature, the user must
setup the primary device before redial the call. And the redialed operation is only for the
primary device in that case. (Please refer to section 5.2 for details)
2.6.2

Adjust Volume

When in the connected or talk/play mode, you can adjust sound volume up or down by
pressing button " " and "!" , respectively. After adjustment, the volume indication bar
will keep on the screen for 2 more seconds before disappearing.
2.6.3

Mute an Active call

You can mute or unmute the Handsfree during a call by pressing button " ". Once
entering the mute mode, icon indicator "
the device exits from the mute mode.
2.6.4

Transfer Call between Handsfee and Handset

Press and hold button " " for 3 seconds to transfer an active call from the handsfree to
handset or from the handset to handsfree.
" to initiate a connection request or follow the handset's user
" will be displayed on the screen. After
".
" for 3 seconds to drop the connection,
"appears on the screen. It will disappear after
13
"or " ! " will cause the device
" will also
" will be
VV950