CAME MS-N5016-UH Konfigurations- Und Bedienungsanleitung Seite 45

After adding the video cameras, click on button
era's default user name and password are, respectively, "admin" and "ms1234").
Guided setup procedure
By default the guided setup procedure starts as soon as the video recorder is switched on. The guided
setup procedure helps to set some values essential for ensuring the correct operation of the device.
You can choose whether or not to enable the guided procedure when the device starts up.
Note: The data entered during the guided setup (Wizard) can be changed at any time.
For setup, proceed as follows:
to display the preview (the network video cam-
Access credentials
Enter user name and password (pre-
set user name 'admin', password
'ms1234').
If you want to change the admin pass-
word, enter the new password.