Functioning; Machine Preparation And Functioning; B Machine Stop Under Emergency Conditions; Machine Disconnection - OEM FX Serie Gebrauchs- Und Instandhaltungshandbuch

5.2 - FUNCTIONING

5.2.a - Machine preparation and functioning (Fig 2)
• Lift the protection grid (1) and insert the right quantity
of ingredients in the container to prepare the dough
(2), (for the quantity, see Technical Data).
In the event you need the dough to be thicker,
capacity shall be reduced.
• Lower the protection grid (1) and energize by operating
the cutout switch placed at the machine upper side.
• Turn the time knob (3) towards "TIMER" to allow the
machine manually to function or towards the right to
get a timed functioning by positioning the knob on the
wished time.
• In case of machines being equipped with two speeds,
the kneading process shall be started with the second
speed by pressing "
occurs " " then press "
In case of machines equipped with one speed, press
" ".
In case of machines with two speeds, DO NOT use
the second speed when the dough is well-mixed.
It is also possible to add in ingredients through
the grid (1).
5.2.b - Machine stop under emergency conditions
(Fig.2)
• In case of EMERGENCY conditions, press "
lift the grid (1).
5.2.c - Machine disconnection (Fig. 2)
• The machine automatically stops when the timer knob
(3) reaches "0" or, in case of manual functioning, press
" ".
WARNING
The machine shall never be disconnected by lifting
the protection grid, since electric parts of the
machine could be damaged.
In case the machine has been disconnected by lifting
the grid (1), to restart the cycle press "
" (if any).
EN - 18
IMPORTANT
", before a dough hardening
".
IMPORTANT
" or
" or "
Fig. 2
3
FX / RVE
Functioning
1
2