LENCO Xemio-668 Bedienungsanleitung Seite 4

4
5 M Button (Menu)
6
7 Micro USB Port (PC Connection / Charge)
8 Microphone Position (mono, inside USB port)
9 Micro SD Memory Card Slot
10 Earphone Output Jack (3.5mm Stereo)
11
12
2. Insert Micro SD Memory Card
This device is design without an internal memory; before you use it, please must insert a Micro SD memory
card into player.
•
Turn "Off" the play, then plug in the Micro SD memory card into player card slot;
•
Now you can use the player for upload / download the desired media files with your PC computer.
•
Or, Upload the desired media files direct to the Micro SD memory card with your computer before insert it into
player.
•
However, "Card error / no card"
want to enter into related menu.
Note: Make sure the player power is in "Off" status when insert / remove the Micro SD memory card from memory
card slot. Otherwise, the player functional may result dead halt or the internal data / files will be lost or damaged.
3. About Player Battery
Player has an internal, non–user-replaceable battery. For best results, the first time you use player, let it
charge for about 2 ~ 3 hours or until the battery status icon in the "Connect" screen shows that the battery is in
full.
Note: Player may continue use battery power after it's been turned off. For maintain the battery life and
performance, if unit isn't used for a while, the battery need to be recharged, recharging the battery at least once
per month.
a. Charging the Battery:
You can charge the player battery in two ways:

Connect player to your computer. Or,

Use the USB power charger. (not included)
b. Connection and Charging:

Once you have connected player with computer / power charger, then you will see the "Connect" screen
appear on screen,

The level bars are running in battery status icon at the "Connect" screen. The battery is in charging.
Button (Next / Fast-Forward)
Button (Previous Menu / Exit)
Button (Volume Down)
Button (Volume Up)
will display if Micro SD card is not in place or not in proper position when you
Battery is in full
"Connect" Screen
4