Digital I/O - Curtiss-Wright XP-24 Bedienungsanleitung

Digital I/O

Inputs
The Digital inputs and Outputs are isolated from the motor and logic power supplies as
well as PE. The voltage for the I/O must be supplied by an external 24 V DC supply. The
functions of the I/O are fully programmable and setup on the I-O page of the Expert
Software Inputs.
The EXP-24 provides two digital inputs, Input 1 and Input 2; each input consists of a
signal line and a return line.
Function
Input 1
Input 1 Return
Input 2
Input 2 Return
Description
Input Voltage Range
On state voltage range
Off state voltage range
Isolation from PE and Supply
Terminal
J28
J29
J26
J27
Specification
0 to 32 VDC
15.0 -32 VDC
0-10 VDC
500 V DC
Digital Input Circuit
Curtiss-Wright | EXP-24 Rev. P PN47676 8/17/17 64