Beper 50.245 Bedienungsanleitung Seite 7

USB rechargeable lint remover Use instructions
Operation
Before charging, please make sure the switch is off.
Insert the small USB charging plug into the slot placed on the handle of the appliance, and insert the big USB
plug into a charging source (Computer, adapter...).
When the appliance is on charge, the indicator light placed on the ON/OFF switch will light up. Let the appliance
charge for 6-8 hours, after charging is completed, disconnect the charging cable.
Please take away the protector lid pulling to the top, switch to ON (I) position and the appliance will start operate.
The appliance must be used to remove unsightly hair, lint and wool balls from skirts, sweaters, jackets, trousers,
blankets or other clothing in general.
Warning: do not remove the lint directly from the garments while wearing.
Pay attention to buttons, zips, signs, stitching and other elements in the garment.
It is advisable to make a test by passing the lint remover into invisible parts of the garment.
Gently wipe the lint remover on the surface of the garments one or more times until completely smoothed.
If the fabric is very light, it is advisable to fold it into two parts before removing the lint.
Note: It is advisable to pass the lint remover on the fabrics by following the weave of the fabric itself.
Cleaning (fig. A-B-C)
Before cleaning the lint remover make sure it is turned off and unplugged.
Remove the protector lid by pulling it to the top.
Remove the plastic ring by turning anti-clockwise (FIG.A)
Remove the metal ring by turning anti-clockwise (FIG.B)
Use the equipped cleaning brush to clean the lint removed (FIG.C)
Warning: it is recommended not to touch the blades because you could be injured.
At the end assemble the components again following steps 2 and 1 in reverse order, making sure to
rotate clockwise.
Attention: the product is equipped with a safety system that will not let operate the product if the
components will not be positioned correctly.
Technical data
Ni-Mh rechargeable battery
USB power supply: 5V
For any improvement reasons, Beper reserves the right to modify or improve the product without any
notice.
7
EN