The Torque Multiplier or its reaction arm can overload during
incorrect use and break causing SERIOUS INJURY or DEATH.
To prevent overload, take the following safety precautions:
ALWAYS inspect the Torque Multiplier for damage BEFORE
use.
NEVER use a damaged Torque Multiplier.
NEVER use electric, pneumatic or battery-operated Torque
Multipliers or impact wrenches.
NEVER exceed the specified maximum input torque.
ALWAYS use impact sockets in accordance with DIN 3129 or
ISO 2725-2 and ISO 1174.
NEVER extend the impact socket or connector between bolt
and Torque Multiplier (see section 3.2).
NEVER use a universal or cardan joint.
NEVER hit the Torque Multiplier with a hammer.
DO NOT drop the Torque Multiplier.
NEVER use the Torque Multiplier if it has been dropped, used to
strike other objects, or if anything has fallen on it.
EN
OVERLOAD HAZARD
7