Assembling The Impact Socket - Gedore DVV13Z Bedienungsanleitung

3.2 Assembling the Impact Socket

When using the Torque Multiplier, NEVER use extensions. NEVER
use a universal or cardan joint. NEVER use an impact socket that is
too long.
Using any of these accessories could cause the Torque Multiplier to
overload, slip or break leading to SERIOUS INJURY and DAMAGE.
Assemble the impact socket:
1. Insert the locking pin (I) halfway
into the impact socket.
2. Pull the rubber ring over the
impact socket.
NOTE: The rubber ring does not
fit completely around the impact
socket because the locking pin
protrudes halfway out of the
socket.
EN
I
15