Usage Via Audio Cable; Charge Battery - Imperial bluTC Bedienungsanleitung

Change volume
You can change the volume in 15 steps from 0-15. At '0' the speakers in the headphones are turned off. When changing the volume
you will hear a sound in the corresponding volume height to confirm. If you reach the maximum volume level (= step 15) you will a
sound with a higher tone. If you reach the lowest volume level (= step 0 = off) you will hear a sound with a deeper tone.
– To increase the volume, move your finger from back to front on the Touch control surface.
– To decrease the volume, move your finger from front to back on the Touch control surface.
Phone calls
If the headphones are connected to a smartphone via Bluetooth, you can take or reject incoming phone calls or call the last chosen
phone number via the headphones. If you are using the headphones for phones calls the audio play is paused automatically and will be
continued once you end your phone call.
You will hear a series of sounds through the headphones if you are have an incoming phone call and the audio play will be paused.
– To take an incoming call, press the Touch control surface with your finger for about 1 second. Via the integrated microphone you
can talk to the person calling you.
– To reject an incoming phone call, press the Touch control surface with your finger for about 3 seconds. You will now hear 2 diffe-
rent sounds and the incoming call is being rejected. Audio play will be continued.
– To end an existing call, press the Touch control surface with your finger for about 1 second to end it. You will now hear a sound to
confirm your action, end the phone call and continue the audio play.
– To call the last called phone number press the Touch control surface with your finger for about 2 seconds. The last called phone
number will be dialled
You can also control incoming and outgoing phone calls via the display of your smartphone as usual. Choose the number on your
smartphone that has an active connection with the headphones and press the calling button on your smartphone. The conversation
can be carried out via the headphones. This is similar to an active hands free car kit in your car.

Usage via audio cable

You can also use the headphones connected to an audio playing device via cable, like traditional headphones. Connect the included
audio cable directly to the audio input connector on your smartphone or audio playing device. In this case it is not possible to use the
Touch control interface of the headphones.
Attention! Connect the headphones only to audio output connectors that are suitable for headphones. These headphones are not
suitable for audio output providing high power.
– Put one side of the audio cable into a 3.5 mm stereo audio or headphones output of the audio playing device or smartphone.
– Put the other end of the audio cable into the 3.5 mm mini-jack audio input of the headphones
– Push the button on the integrated switch in the enclosed audio cable to stop, pause and continue play.

Charge battery

Attention! Only use the included charging cable and power mains adapter to charge the headphones. Charging the built in rechar-
geable battery with other cables or power mains adapters can lead to irreparable damage and influence the correct working of the
headphones.
If you want to charge the battery via USB, please use at least a USB 2.0 port or newer. Do not charge on a Power-USB port. Please
check the battery is charged at normal room temperatures. The ideal temperature for charging is between 5 and 25 °C.
TELESTAR IMPERIAL bluTC
GB
15