Functions; What Else Do You Need; Turn It On And Off - Imperial bluTC Bedienungsanleitung

Functions

With the Imperial bluTC headphones you can:
» listen to music or radio wirelessly or have a phone call
» switch between audio play and hands free calling
» switch between available songs while listening to music
» change the volume
» listen to music via the included audio cable from audio devices without Bluetooth

What else do you need

To create a Bluetooth connection your audio playing device or smartphone also needs to have Bluetooth on board and enabled. Other
audio playing devices like laptops can easily be upgraded with Bluetooth using a relatively cheap Bluetooth USB dongle.
Alternatively you can also connect the headphones via the included 3.5 mm mini-jack cable with a 3.5 mm audio input of your audio
playing device or smartphone. The controls via the Touch control panel on the side of the headphones is disabled when using it with the
audio cable attached. The Touch control is only available in Bluetooth mode.

Turn it on and off

When the headphones are on, the light in the main switch will blink blue every 2 seconds. If the light blinks red, it means that the
battery is almost empty and you need to (re)charge it (see chapter Charge battery on page 10).
– To turn the headphones on, press and hold the main switch for about 5 seconds. The light in the main switch will blink blue and red
signalling that the headphones are on.
– Slide the lock of the Touch control to the front to enable the use of the Touch control on the headphones right ear.
– To turn the headphones off, press and hold the main switch for about 5 seconds. If the light in the main switch lights up blue and
red for a short period and will be off afterwards, the headphones are turned off.
If you wear the headphones whilst turning it on and off, you will hear different sounds and sequences playing confirming your action, on
or off.
If you cannot turn the headphones on, the integrated battery does not have enough power to turn it on or is empty. You need to (re)
charge the battery before you can turn the headphones on (see chapter Charge battery on page 15).
TELESTAR
To use the device and listen to music to its optimum you can change the size of the headband to
fit your personal needs. To do so, please pull down or slide up the shells of both ears to adjust to
size to your personal needs.
The ears of the headphones can move horizontally and vertically to fit your needs automatic.
IMPERIAL bluTC
GB
13