Hartan Kombitasche Bedienungsanleitung Seite 18

Quality agreement
WARRANTY CLAIM — YES OR NO?
Mould formation: Fabric parts, having become wet, should be dried
properly to prevent mould formation (see Instructions). Mould formation
will not be covered by the warranty.
Bleaching of the fabrics: We confirm that the fabrics comply with the
established standards. It cannot be ruled out that colours of the fabrics
may fade while the parts are exposed to direct sunlight, washed too
frequently, come into contact with sweat and detergents, or suffer
abrasive wear (especially on those parts where the carry cot is handled).
Consequently, colour fading is excluded from the warranty. It is
unavoidable that colours sometimes differ slightly from one individual
batch to the next, which is why this case will not be covered under
the warranty.
Knob formation on fabrics: We recommend that you apply general
clothes care. As with woollen sweaters, the knobs can easily be removed
by using a clothes-brush or burling machine.
Tearing of seams, fabrics, press studs: At the time of purchase,
please check carefully that all the fabric parts, seams and snap fasteners
have properly been sewn and fastened. In case of a possible complaint
concerning seams/defective snap fasteners, a claim must immediately
be reported to your dealer after the defect has been discovered.
16