AGV HORIZON SKYLINE Bedienungsanleitung Seite 15

3
4
5
CLICK !
6
N.B. In the event that the plastic
strap is difficult to remove, it may
be necessary to use the tool sup-
plied with the helmet.
In this case, move the neck roll
slightly away from the edge of the
helmet to identify the red clip and
insert the tool in that clip (3).
Holding the tool in place, remove
the plastic strap (4).
Remove the tool.
To replace the cheek pads, insert
them into the helmet and snap the
automatic connection buttons (5).
Insert the plastic strap in place on
the side of the cover (6).
Make sure the cheek pads are ful-
ly secured to the helmet.
15