Camera Setup; English - Logitech QuickCam Communicate STX Installation

Logitech ® QuickCam ® Installation
3

Camera Setup

During the Camera Setup step of the installation process, you will beprompted to connect the camera
to a USB port on your computer. Important: Do NOT connect the camera until you are prompted
to do so.
4
Position Your Camera, Microphone, and Speakers
Your camera comes with Logitech ® RightSound ™
the best possible audio performance:
1. Position your camera in the middle of your monitor
for optimal eye contact.
2. Position your camera's microphone no more than
3 feet (1 m) away from you and point it toward you.
3. Position your speakers (if used) at least 12 inches
(30 cm) away from your microphone to reduce
feedback, and then angle your speakers away from
your microphone.
Tip Do not place objects between you and the microphone.
 English
echo-cancellation technology. The following steps will ensure
Logitech ® QuickCam ® Installation
5
The Audio Tuning Wizard
The first time that you start QuickCam, you are guided through
the Microphone/Speaker Setup Utility and Audio Tuning Wizard that
lets you do the following:
• Select the audio input device (microphone)
and audio output device (speakers).
• Enable Acoustic Echo Cancellation (AEC)—recommended.
• Specify microphone input volume and speaker output
volume.
• Test audio settings.
Tip To change these settings later, in the QuickCam
click the Settings button and then click the Audio tab.
® software,
English