Material And Application; Design And Technical Specifications; Compensators Ø15-54 Mm - KAN-therm Inox Bedienungsanleitung

Material and application

KAN-therm Inox axial bellow compensators are made of stainless steel grade 1.4404
and intended for the construction of internal, closed, pressurized heating and chilled
water installations.
Note: The compensators do not have hygienic certificates and therefore may not be
used in potable water systems.

Design and technical specifications

The compensators are equipped with press ending (15-54 mm) or plain pipe ending
(76.1-108 mm). The connections are achieved by three-point "M" profile radial
pressing.
Compensators Ø15-54 mm
Material
Seal
Twork
Tmax.
Pmax.
Crimping profile
d1 = d2
D1 = D2
a
z1 = z2
l1 = l2
Max. elongation to compensate
∆l
Effective area [cm²]
Spring rate [N/mm]
weight
16
KAN-therm Inox Axial compensators
1.4404 (AISI 316L)
EPDM70
135 °C
150 °C
16 bar
M
15 mm 18 mm 22 mm
24 mm 27 mm 32 mm
24 mm 27 mm 37 mm
35 mm 33 mm 39 mm
55 mm 53 mm 60 mm
14 mm 16 mm 20 mm
3,1 4,0 7,2
28 28 40
0.05 kg 0.07 kg 0.13 kg
28 mm 35 mm 42 mm
38 mm 45 mm 54 mm
44 mm 50 mm 60 mm
42 mm 44 mm 47 mm
65 mm 70 mm 77 mm
22 mm 24 mm 24 mm
10,5 13,9 20,4
42 54 47
0.16 kg 0.24 kg 0.31 kg
54 mm
65 mm
72 mm
55 mm
90 mm
30 mm
31,0
48
0.46 kg