Herunterladen Inhalt Inhalt Diese Seite drucken

Signs Table; Alarm - LA NORDICA Extraflame LP30 Benutzerhandbuch

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 70
Display
START
PELLET LOADING
IGNITION
START
WORKING
BURN POT CLEANING
FINAL CLEANING
MODULATION
STAND - BY
WAIT COOL - BLACK OUT
HOFF
ANTI-FREEZE
ANTILOCK
EXCH. BLOCK

ALARM

When the boiler goes into alarm mode, the screen becomes red and does not accept commands outside of the display. When
ALARMS MEMORY
the scree turns green, "
not from the display. If the alarm can be solved by the user, once this has been performed the boiler can be re-ignited by
pressing the P1 key. In the event of a more complex alarm, contact the after-sales assistance.
P1
46
Meaning
The start phase is in progress
the continuous feeding of the pellets during the ignition
phase is in progress
The boiler is in ignition phase
the work preparation phase is in progress
the normal working phase is in progress, the boiler is
working at the power set
the automatic burn pot cleaning is in progress
the fi nal cleaning is in progress
the boiler is working at minimum power
boiler waiting for re-ignition due to an external thermostat
the boiler is cooling after a power cut.
Boiler in stand-by for re-ignition because the water inlet
temperature has exceeded the parameters set
the anti-freeze function is in progress as the H2O t° is below
the factory set threshold
If the boiler has remained in the Off state for at least 96
hours, the pump starts to function, so that blocking does not
occur.
indicates the cleaning block of the exchanger
" will be displayed with the type of alarm and the boiler can respond to controls
SATURDAY
SABATO
STBY
29 / 04 /2010
18 : 56
ACTIVE ALARM
ALLARME ATTIVO
+
-
P2

SIGNS TABLE

SIGNALS
P3
Explanation
-
-
-
-
-
-
-
-
the boiler will only re-start when the external
thermostats makes a request
once cooling is completed it will automatically
ignite
as soon as the water temperature drops below the
pre-established parameters, the boiler will switch
back on
the pump is active until the water reaches the pre-
set factory parameter
the pump activates for a brief period, in a way to
prevent blockage of the same.
contact after-sales centre
SATURDAY
SABATO
STBY
29 / 04 /2010
18 : 56
ALARM MEMORY
MEMORIA ALLARME
"TYPE OF ALARM"
"TIPO DI ALLARME"
+
-
P1
P2
P3
SIGNS TABLE

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis