Features - LA NORDICA Extraflame LP30 Benutzerhandbuch

Pump integrated in the thermo product
1
with 5 m head
Volume of expansion vessel integrated into
2
thermo-product (l)
3
Burn pot
4
Automatic cleaning mechanism
5
Shell and tube turbulator cleaning
3 bar safety valve integrated into the
6
thermo-product
Minimum and maximum pressure pressure
7
switch integrated into the thermo-product
8
Ash drawer
Heat exchanger water content (l)
Maximum content of water in the system for
integrated expansion vessel (l)
The graphics given below illustrate the behaviour of the pump
used on our thermo-products at the speeds that can be set.
6
5
4
3
2
1
0
0,0 0,5 1,0
Flow rate (m
Tests performed using wooden pellets as fuel, certifi ed
according to ONORM M7135 DIN PLUS.
The data given above is indicative and not binding. The
manufacturer reserves the right to make any modifi cations in
order to improve product performance.

FEATURES

FEATURES
yes
12
yes
yes
yes
yes
yes
66
170
1,5 2,0 2,5
3
/h)
6
7
1
4
Weight
Height
Width
Depth
Flue exhaust pipe diameter
Air intake pipe diameter
Max. global heat output
Max. useful heat output (to the water)
Minimum global heat output
Min. useful heat output
Max. hourly fuel consumption
Min. hourly fuel consumption
Feed-box capacity
Recommended flue draught
Nominal electric output
Appliance electrical power
Nominal voltage
Nominal frequency
Water inlet/outlet pipe diameter
Automatic exhaust pipe diameter
Pump head
Max. working water pressure accepted
Min. working water pressure accepted
5
2
3
8
kg
333
mm
1406
mm
875
mm
772
mm
120
mm
60
kW
33.8
kW
31.1
kW
10.0
kW
8.6
kg/h
7.0
kg/h
2.0
kg
~ 85
Pa
~ 10
W
470
W
470
Vac
230
Hz
50
"
1
"
1/2
m
5
bar
2.5
bar
0.6
29