Technical Specifications - Vitek VT-1414 W Die Betriebsanweisung

To install the blender attachment (9), move
–
the installation place (6) lid aside with the
bottom part of the attachment (9), insert the
blender attachment (9) into the installation
place (6) and turn it counterclockwise until it
is fully fixed (you will need to turn the attach-
ment (9) several times).
Switching on
Insert the power plug into the mains socket.
–
Sink the installed attachments into the bowl
–
with products.
Switch the mixer on using the switch (3) and
–
set required attachment rotation speed from
«1» to «5» (see the table).
To switch the maximal rotation speed on,
–
press and hold the button (2) «TURBO».
To operate the blender attachment (9), set
–
the switch (3) to the extreme left position ( ),
press and hold down the button (2) «TURBO».
Switching the unit off
Set the switch (3) to the «0» position and
–
unplug the unit.
Removing the attachments
Holding the hooks (7) or the beaters (8), press
–
the attachment release button (4) and remove
the attachments.
To remove the blender attachment (9), turn it
–
clockwise.
RECOMMENDED OPERATION MODES
Speed
1, 2 Mixing dry ingredients.
2, 3 Making mashed vegetables
and different sauces.
Mixing ingredients for dough
(e.g. butter with sugar) and
kneading dough.
3, 4 Making "light" dough for
biscuits, puddings etc.
4, 5, «TURBO» Beating – e.g. cream, milk,
egg whites or egg whites with
yolks.
VT-1414.indd 5
CLEANING AND CARE
Switch the unit off and unplug it.
–
Wash all removable parts with warm water and
–
a neutral detergent and then dry them.
Clean the unit body (1) with a soft, slightly
–
damp cloth and then wipe the body (1) dry.
Do not immerse the unit body (1), power cord
–
and plug into water or any other liquids.
Use neutral detergents to remove dirt; do not
–
use metal brushes, abrasive detergents and
solvents.
STORAGE
Clean the unit.
–
Keep the unit away from children in a dry cool
–
place.
DELIVERY SET
Mixer – 1 pc.
Beaters – 2 pcs.
Dough hooks – 2 pcs.
Blender attachment – 1 pc.
Instruction manual – 1 pc.

TECHNICAL SPECIFICATIONS

Power supply: 220-240 V ~ 50/60 Hz
Power consumption: 300 W
The manufacturer preserves the right to change
the specifications of the unit without a prelimi-
nary notification.
Unit operating life is 5 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim under
the terms of this guarantee.
This product conforms to the EMC-
Requirements as laid down by the Council
Directive 2004/108/ЕС and to the Low
Voltage Regulation (2006/95/ЕС)
5
ENGLISH
30.10.2014 14:54:05