STUWE SDG Gebrauchs- Und Bedienungsanleitungen Seite 20

2. Safety Instructions and
Personal Protection Equipment
Personal Protection Equipment
Use (chemical-resistant)
gloves
A danger exists during installation/
removal work through contact with
lubricants! Attention must be paid to the
safety data sheets relating to materials.
Wear gloves.
Danger through sharp corners and
edges during handling.
The shrink disc may become very hot
during operation due to external heat
sources. Pay attention to possible hot
surfaces during installation/removal
work.
Use
eye protection
A danger exists during installation/removal
work through contact with lubricants!
Wear full-vision glasses (goggles). At-
tention must be paid to the safety data
sheets relating to materials.
They may be obtained from us on request.
20
Use
head protection
A danger of injury exists during installa-
tion/removal work through the raising and
lowering of the parts as well as a danger
of hitting your head on existing machine
parts. Appropriate head protection must
be worn.
Use
foot protection
A danger of injury exists during installa-
tion/removal work through the falling down
and setting down of the parts. Appropriate
foot protection must be worn.