Chemical And Biological Safety; Product Overview - Hach FL1500 Basis-Benutzerhandbuch

1. Disconnect the equipment from its power source to verify that it is or is not the source of the
interference.
2. If the equipment is connected to the same outlet as the device experiencing interference, connect
the equipment to a different outlet.
3. Move the equipment away from the device receiving the interference.
4. Reposition the receiving antenna for the device receiving the interference.
5. Try combinations of the above.

Chemical and biological safety

Chemical or biological hazards. If this instrument is used to monitor a treatment process and/or
chemical feed system for which there are regulatory limits and monitoring requirements related to
public health, public safety, food or beverage manufacture or processing, it is the responsibility of the
user of this instrument to know and abide by any applicable regulation and to have sufficient and
appropriate mechanisms in place for compliance with applicable regulations in the event of malfunction
of the instrument.

Product overview

The flow logger collects and analyzes water quality data from water quality sensors. The user can
install the flow logger indoors or outdoors with protection from environmental conditions. There are
two available models, a basic and advanced model. Refer to
available sensor options.
The user can configure the measurement parameters from the logger or from a connected computer.
The user can also save a configured program to a USB memory stick and upload the program to the
logger (Figure 1).
6 English
D A N G E R
Specifications on page 3 for the