Main Menu Overview - Hach FL1500 Basis-Benutzerhandbuch

Figure 11 Keypad
1 STATUS key—Shows the instrument data, starts
the slideshow
2 ARROW keys—Moves the cursor
Status screen
Push the STATUS key to see the instrument data screen. The instrument data screen shows the
information that follows.
• Channels Logging—Shows the number of logged channels. Select Channels Logging to see the
measurement data for the logged channels. Use the right arrow to scroll through the measurement
data for all channels.
• Active Channel—Shows the active alarms. Select Active Channel to see the channel and system
alarms.
• Totalizers—Shows the totalizer data for the configured totalizers. Select Totalizers to see the flow
volume for the configured totalizers.
• Sensor Port—Shows the configured sensor ports. Select Sensor Port to see the configured
sensors and inputs.

Main menu overview

Push the MENU key to see the main menu.
Option Description
Selects the channels to log and
the log intervals. Configures the
channel and system alarms.
Programming
Configures the sensor and
measurement parameters.
Sensor Setup
3 SOFT keys—Selects the option on the display
4 MENU key—Goes to the main menu
Table 6 shows the main menu options.
Table 6 Main menu options
Option
Totalizers
Hardware Setup
Description
Configures the settings for the
mechanical (externally attached) and
software totalizers.
Sets the options for the logger, sensors,
totalizers, I/O type, sampler, and
communications protocol.
English 21