Assembly And Installation; Safety; Supply Connections; Supply Connections For Optional Dimming Function - GIFAS-ELECTRIC AlphaLUXX 25 Bedienungsanleitung

Operating Instructions for AlphaLUXX 25 / 40 / 60

3 Assembly and installation

3.1

Safety

If the AlphaLUXX exhibits mechanical damage (faulty cables or plugs, cracks, etc.) or electrical de-
fects, it must be taken out of use immediately. The current national guidelines regarding periodic
checks apply.
Hint
To avoid danger, any damaged external flexible cable on these lights must be replaced only by the
manufacturer, its service representative or a similarly qualified professional.
3.2

Supply connections

230V AC connection to connecting cable with 3 wires:
Wire colour brown
Wire colour blue
Wire colour yellow/green
20-48V DC connection to connecting cable with 2 wires:
Wire colour brown
Wire colour blue
Hint
To ensure protection against leaks, the optional screw must be screwed in tightly.
This must be safeguarded using suitable measures at installation sites where the connecting cable
is subjected to particular mechanical stress.
No liability can be accepted for connections that are not established correctly (not completely tight).
Where there are large numbers of LED lights connected in series on each current circuit, we al-
ways recommend using LS switch characteristic "D" or switch-on current limiters in extreme cases.
Fault-current circuit breakers must not trip because type "A" and surge current strength 3kA type G
pursuant to IEC 61008 can be regarded as the standard for lighting.
3.3

Supply connections for optional dimming function

1-10V dimming function: blue (grey): DIM+ / white (black): DIM-
Created Edited
02/11/2016 28/05/2019
A.S. A.S.
= L
= N
= PE
= +
= -
Object ID
....
Page 23 / 53