Herunterladen Inhalt Inhalt Diese Seite drucken

Axis Q60 Serie Installationsanleitung Seite 18

Vorschau ausblenden Andere Handbücher für Q60 Serie:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 51
The Axis product can be installed with the cables routed through or along the wall or ceiling.
Read all the instructions before installing the product. Some installation steps would benefit from
being completed together because they require removal of the dome cover.
The product is supplied with a clear transparent dome cover (premounted) and a smoked
transparent dome cover. To replace the dome cover, see page 18.
A standard or high capacity SD card (not included) can be used to store recordings locally
in the product. To install an SD card, see page 18.
To install the product using the hard ceiling mount, see page 19.
To install the product using the drop ceiling mount, see page 20.
To install the product using a compatible bracket from AXIS T91A Mounting Accessories
(sold separately), see page 23.
To install the supplied midspan, see page 25.
Replace the Dome Cover
Replacing the dome cover is only necessary if you want to use the smoked transparent dome cover
or if the dome cover is scratched or damaged.
1. Loosen the dome ring screws and remove the dome cover.
2. Remove the dome bracket screws and remove the dome bracket and the dome cover
from the dome ring.
3. Attach the dome bracket and the dome cover to the dome ring and tighten the screws.
4. To install an SD card (not included), see Install an SD Card, on page 18.
5. Attach the dome cover to the top cover and tighten the screws (torque 1.5 Nm).
Install an SD Card
It is optional to install a standard or high capacity SD card (not included), which can be used for
local recording with removable storage.
1. Loosen the dome ring screws and remove the dome cover.
2. Insert an SD card (not included) into the SD card slot.
3. Attach the dome cover to the top cover and tighten the screws (torque 1.5 Nm).
NOTICE
NOTICE
NOTICE
To prevent corruption of recordings, the SD card should be unmounted before it is ejected.
To unmount, go to Setup > System Options > Storage > SD Card and click Unmount.
18
AXIS Q60 Series

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Q6032 ptzQ6034 ptzQ6035 ptz

Inhaltsverzeichnis