Technical Data; Noise/Vibration Information - Bosch PSR 18 LI-2 Ergonomic Originalbetriebsanleitung

(1) Keyless chuck
(2) Torque presetting ring
(3) Operating mode presetting ring
(PSB 18 LI-2 Ergonomic)
(4) Gear selector switch
(5) On/off switch
(6) Rotational direction switch

Technical data

Cordless drill/driver
Article number
Rated voltage
No-load speed
– 1st gear
– 2nd gear
Impact rate
Max. torque, hard/soft screwdriving application ac-
cording to ISO 5393
Max. drilling diameter
– Steel
– Wood
– Masonry
Max. screw diameter
Chuck capacity
Drill spindle thread
Weight according to EPTA-Procedure 01:2014
Permitted ambient temperature
– during charging
B)
– during operation and during storage
Recommended batteries
C)
Recommended chargers
A) Depends on battery in use
B) Limited performance at temperatures <0 °C
C) The following chargers are not compatible with the PBA rechargeable battery: AL 1814 CV, AL 1820 CV, AL 1860 CV

Noise/Vibration Information

Noise emission values determined according to
EN 62841-2-1.
Typically, the A-weighted sound pressure level of the power
tool is 74 dB(A). Uncertainty K=5 dB. The noise level when
working can exceed the volume stated. Wear hearing pro-
tection
Total vibration values a (triax vector sum) and uncertainty K
h
determined according to EN 62841-2-1:
2
Drilling into metal: a = 2.5 m/s , K = 1.5 m/s
h
Impact drilling into concrete: a = 17 m/s
h
2
Screwdriving: a = 2.5 m/s , K = 1.5 m/s
h
Bosch Power Tools
(7) Battery release button
(8) Battery charge indicator
(9) Battery
(10) "PowerLight"
(11) Handle (insulated gripping surface)
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
PSR 18 LI-2 Ergonomic
V=
-1
min
-1
min
-1
min
Nm
mm
mm
mm
mm
mm
kg
°C
°C
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
2
,
increase the vibration and noise emissions over the total
working period.
2 2
, K = 2.0 m/s .
To estimate vibration and noise emissions accurately, the
2
.
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
A)
PSB 18 LI-2 Ergonomic
3 603 JB0 1.. 3 603 JB0 3..
18
0–430
0–1400
–
A)
32/28
13
38
−
10
1.5–13
1/2"
1.2
0... +35
-20 to +50
PBA 18V...W-. PBA 18V...W-.
AL 18...
1 609 92A 4YA | (13.05.2019)
English | 15
18
0–430
0–1400
0–22500
A)
32/28
13
38
11
10
1.5–13
1/2"
1.3
0... +35
-20 to +50
AL 18...