Power Supply - SFA JET2 Bedienungsanleitung

2
KEEP AWAY FROM NAKED FLAME
Fire hazard

POWER SUPPLY

The electrical installation should be carried by a qualified person.
The unit should be connected to a fully earthed electrical supply. All wiring must conform to
BS7671, 1992 requirements for electrical installations.
The unit requires a 220/240V single phase AC 50 Hz supply (UK specification). Do not
connect the unit to a conventional plug and socket. It must be wired into a fused, unswitched,
fixed wiring connector fitted with a 5 amp fuse. The wires in the mains lead are coloured in
accordance with the following code :
Warning:
Ensure the electricity is turned OFF at the main switch board before wiring to connector. All
work on cable, pressure chamber and motor should only be carried out by a qualified Saniflo
servicing agent, as special tools are required.
WARNING
Do not kink the electric power cable.
When seated on the seat for a long time, please adjust the seat temperature to «low».
Children, the elderly and those with limited mobility should always adjust the seat
temperature to «low».
Do not insert fingers or other objects into the hot air outlet.
Keep out of direct sunlight.
In case of malfunction please call an approved service engineer.
3
USE
Do not force the lid to open/close.
Ensure remote control is kept dry.
For best results, replace the batteries at the first sign that power is low.
Switch off and disconnect the power supply in case of prolonged absence.
Clean the filter regularly.
NEW Notice_UK_DE_NL_SE_HD.indd 3
Brown - Live
Blue - Neutral
Green/Yellow - Earth
UK
4/02/10 11:01:39