Coitech E0336WST4H4PR Handbuch Seite 9

Sensor unit
• Place the sensor in a location that is
protected from direct sunlight and rain.
• Mount the sensor at least 1.5 m (5 ft)
above ground, if possible.
• Screw a screw nearly all the way into the wall,
leaving the head sticking out a little and hang
the sensor using the hanging hole (27).
Instructions for use
Settings
1. In normal mode, hold in [ SET ] for 3 seconds to enter
the settings mode.
2. Press or hold in [ ▲ ] or [ ▼ ] to change the value.
Confirm each stage with [ SET ].
If none of the buttons is pressed within 20 seconds, the settings are
saved and the weather station reverts to normal display mode.
Set the following in sequential order:
- Hour: Hour setting
- Minute: Minute setting
- Year: Year setting
- MD/DM: Set the order of how the day and month are displayed.
- Month: Month setting
- Day: Day setting
- Pressure unit: Set which units of measurement the atmospheric
press is displayed in (hPa/mb, mmHg or inHg)
Selecting the units of temperature
Press [ ▲ ] to toggle between units of temperature measurement in
degrees Celsius (ºC) and degrees Fahrenheit (ºF).
9