Installation - Coitech E0336WST4H4PR Handbuch

Sensors
26. LED indicator (flashes when
data is being sent to
the main unit)
27. Hanging hole
28. Channel selector
29. Battery compartment

Installation

Sensors
• Before the sensors can be paired with the main unit they must be
set to work on different channels.
• We recommend that the sensor that is to be located outdoors be
set to work on channel 1 in order for the weather station to provide
as correct a weather forecast as possible.
1. Slide the battery cover of the sensor in the direction of the arrow.
2. Set the channel selector of the first sensor to position 1,
the selector of the second sensor to position 2 and the third to
position 3.
3. Insert 2 × AAA/LR03 batteries, observing the markings on
the bottom of the battery compartment.
4. Slide the battery cover back on until it clicks into place.
Main unit
The main unit of the weather station can operate off batteries or
the mains using the included mains adapter.
Battery operation
1. Remove the battery cover (16) from the back of the main unit.
2. Observe the markings on the bottom of the battery compartment
and insert 3 × AAA/LR03 batteries.
3. Refit the battery cover.
26
6
27
28
29