Werbung
Verfügbare Sprachen
Verfügbare Sprachen
If you are using another set of headphones other than the supplied Jabra
GB
model, please note that differences in impedance and sensitivity might limit
or increase the maximum volume output level. An impedance level of 16
FR
Ohm is recommended for the best performance. However, always use extra
precaution when using another set of headphones than the original Jabra
ES
model.
PT
7. What the lights mean
DE
What you see
What does it mean
Flashing green light
Flashing every 5 seconds: On, but not paired
IT
to a phone
Flashing blue light
Flashing every 3 seconds: Active on a call/talking
NL
Flashing blue light
Flashing every 5 seconds: Paired to a phone
SU
Flashing lights in
Flashing every second: Incoming call
different colors
NO
Flashing purple light
Flashing every 3 seconds: Music streaming
Flashing red light
Running low on battery
SE
Solid red light
Charging
DK
Solid green light
Fully charged
Solid blue light
In pairing mode – see section 3
GR
8. Troubleshooting and FAQ
I hear crackling noises
Bluetooth is a radio technology which means it is sensitive to objects
between the headset and the device it is connected to. You should be able to
have up to 10 metres (33 feet) of distance between the headset and the con-
nected device when there are no major objects in the way (walls, etc.).
I cannot hear the phone call in the headset
• Increase the volume on the Jabra BT320s.
• Ensure that the headset is paired to your phone.
• Make sure your phone is connected to the headset in the phone's menu
or by tapping the Answer/End button on the Jabra BT320s
I have pairing problems
You may have deleted your pairing connection in your mobile phone –
follow the pairing instructions in section 3.
10
RELEASE YO UR JABR A
I cannot use Reject call, Call on hold, Redial or Voice dialling
These features are dependent on your phone supporting them, please con-
sult your phone's manual for details.
I cannot hear music in the headset
• Increase the volume on your device.
• Ensure that the headset is paired to your Bluetooth enabled device.
• Make sure that the Jabra BT320s is charged
I have problems streaming in stereo from my music device (mobile
phone, PC, MP3-player etc.)
Make sure the other device supports Bluetooth 1.1 or 1.2 including the
Advanced Audio Distribution Profile (A2DP), otherwise it will not work. Please
consult the user manual of the device you are using for how to pair it to a
Bluetooth Stereo headset.
I can hear stereo but the music control buttons do not work
The connected device must support the Bluetooth profile for remote control,
AVRCP to make the music control buttons work. Please consult your device's
user manual.
The indicator lights (LED) are not working:
Simultaneously press the Play/Pause/Stop and the Skip Back button to turn
the indicator lights on or off.
When active on a phone call, the caller cannot hear me:
Simultaneously press the volume + and – button to mute/un-mute the
microphone when active on a phone call.
9. Need more help?
See the back side cover for your country's support details.
10. Taking Care of your headset
Always store the Jabra BT320s with the power off and safely protected..
Avoid storage at extreme temperatures (above 45°C/113°F – including direct
sunlight – or below -10°C/14°F). This can shorten battery life and may affect
operation. High temperatures may also degrade performance.
If exposed to water or other liquids, the device should be wiped clean from
any traces of water.
Jabra BT320s Bluetooth stereo headset
GB
FR
ES
PT
DE
IT
NL
SU
NO
SE
DK
GR
11
Werbung
Kapitel
Fehlerbehebung
