Remove The Side Panels; Installing The Motherboard; Installing The Psu; Installing Pci-E/Pci Card(S) - Corsair Graphite Series 380T Installationsanleitung

GRAPHITE SERIES
1. Remove the Side Panel
Simply pull upward on the side
panel latches to release.
Note: Corsair recommends
removing both side panels and
setting them aside when building
your system to avoid accidental
damage. Both side panels are
interchangeable and should be
removed to reduce clutter.

2. Installing the Motherboard

First, install your
motherboard's I/O shield (see
your motherboard's manual
for guidance).
Align your motherboard with
the pre-installed standoffs.
Use the provided screws to
secure the motherboard to the
motherboard tray.
5
380T
®

3. Installing the PSU

Unscrew and remove the PSU
mounting back plate then slide
in the PSU from the back of
the case. Next, mount the PSU
back plate onto the case then
align the holes and secure the
PSU to the back plate with
screws.
Note: PSU must be installed fan
side facing down.

4. Installing PCI-E/PCI Card(s)

Remove thumbscrews and
corresponding slot cover(s).
Install the add-on card and
secure with thumbscrews.
6