Operation; Maintenance - eSmart Mirolo Montageanleitung

Wall mounting with
wall plugs and screws
Mounting of the canvas onto a wall is done using
the wall plugs and M6x45-screws supplied.
Measure the size of the borehole so that the wall
plug can be inserted precisely.
Now tighten the M6x45-screws. Be sure to lea-
ve a few millimeters of air between the wall and
the screw head.
Now you can hang the screen housing over the
screw heads and mount it. Now firmly tighten
the screws.

Operation

Extending the screen
Pull the handle down gently. When you stop, the
screen will lock at this position.
18
Retracting the screen
To avoid soiling the material, and so that the
gathering areas are not slackened prematurely,
please draw the screen in again after use. Pull
the handle down briefly and let the screen roll
up slowly in a controlled manner. In this way you
will avoid damaging the gathering mechanism and
the weighting bar.

Maintenance

Your screen is a maintenance-free system.
However, if during use, a problem with the
rolling mechanism arises, please contact our
customer services at Service@eSmart.de.