Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1.
About these instructions
These instructions contains important information, in order to safely and pro-
perly install, operate and maintain the MANOCOMB-IP65/XI Pressure Switch
and also information on how to fix simple failures youself.
Before working with the MANOCOMB-IP65/XI Pressure Switch make sure to
have completely read and understood this instruction, especially chapter „02
For your safety"!
Related Documents
The MANOCOMB-IP65/XI pressure switch is part of a system. Also take note of
instructions of other components and/or systems, these include i.a.:
•
system documentation of the engineering/construction company
2.
For your safety
The MANOCOMB-IP65/XI Pressure Switch is being manufactured according to
the current state of the art and safety rules.
Nevertheless, there is a risk of bodily injury and material damages, if you do not
observe the following general safety and health warnings in this guide:
1.
Read these instructions thoroughly and completely before working with
the MANOCOMB-IP65/XI Pressure Switch.
2.
Keep these instructions so they are always accessible and available to
all users.
3.
Always forward the MANOCOMB-IP65/XI pressure switch to third
parties with these instructions.
4.
In addition, observe generally valid, legal and other binding regulations
MANOCOMB®-IP65/XI Operating Instructions
of the European or national legislation as well as the regulations in your
country for accident prevention and environmental protection.
Intended use
The MANOCOMB-IP65/XI pressure wwitch is a signal element that can be used
for measuring pressure in pressure lines for - depending on model - gases, va-
pours, liquids or suspensions.
The setted values are being transformed into - depending on model - electric or
pneumatic, or both output signals.
•
Keep within the performance limits mentioned in the technical data
•
On explosion proof devices the installation and maintenance regulations
for ex devices according to EN 60079-14, EN 60079-17 (CENELEC) have
to be observed
•
only use the product for industrial applications
•
The device must not be altered
•
Intended use also presumes, that you have read and understood these
instructions, especially chapter "02 For your Safety".
NOT intended use
Not intended use is considered especially, but not only when you operate the
MANOCOMB-IP65/XI pressure switch
•
in areas or applications not mentioned in these instructions
•
under conditions/circumstances which differ from those mentioned in
these instructions.
Werbung
