Getting Started; Powering Your Camera; Mobile Application - Samsung WISENET SEP-5001RD Benutzerhandbuch

g s
ettIng tarted

Powering Your Camera

1.Fully charge the camera before use.Camera must be plugged in at all times.
2.To turn the camera "On", press the power switch located on the bottom of the
camera. A light will illuminate if it is turned on.
n
Only use the enclosed Camera Power adapter.
`
SEP-5001RDP CU-170615.indd 7

Mobile Application

1. Go to the Google Play or Apple App Store to install the "BabyView" or
"WiseNet BabyView" App " "onto your mobile phone.
2. Turn camera on.
3. Press the "reset" button on the camera.
4. Go to your phone's Wi-Fi network list and select "BabyView_XXXXXX"
which contains the last 6 characters of the camera's serial number located
on the bottom of your camera (Picture 1).
5. Open the app and press "Tap here to add device (picture 2)
6. Scan the QR code found on the bottom of the camera or search, then
enter in the default password "000000", and click "OK" when finished
(picture 3~5).
The monitor will show a "remote" icon on the screen when remotely
connected to the baby unit via "BabyView" App.
7. When your camera is connected it will indicate that it is "online"
Press the down arrow and select "Edit Device" → "Advanced" →
"Manage Wi-Fi networks" (picture 6-9).
8. Select your local Wi-Fi network and enter the password (picture 10-11)
9. Make sure the SSID says "Connected" Press "OK" until you are directed
back to the camera list. To start live-viewing, select the registered camera
from the list and modify your password.
n
This app is intended for remote viewing with limited functionalities. Main controls are
`
available on the parent unit (monitor). In order to add additional smart devices to the
camera. Please directly scan the QR code at the bottom of the camera that you wish to
pair with, and input the existing Password for the camera.
English · 7
2017/7/7 10:01:08