Trouble Shooting - Samsung WISENET SEP-5001RD Benutzerhandbuch

t s
rouble hootIng
Problem
No picture from a 1. Check all connections to the camera. Make sure the adapter
camera is plugged in.
2. Make sure that the cameras and monitor are both ON.
3. Make sure that the camera is in range of the monitor.
4. Make sure the camera and monitor are paired.
5. Adjust the monitor antenna to a vertical position.
The picture is The picture may become choppy when experiencing a lower
or has become frame rate
choppy (i.e. 10 frames per second vs. a higher 20 frames per second).
1. Try moving the camera closer to the monitor.
2. Remove obstructions between the monitor and camera.
3. Adjust the monitor antenna to a vertical position.
No sounds (even 1. Make sure that the power adapter is connected to the camera.
with both units 2. The battery on the monitor may be dead, be sure to charge it
turned on) using the adapter included.
3. The monitor may be out of range from the camera.
Your BrightVIEW
is emitting an This sound is normal feedback which occurs if the monitor and
high pitched camera are too close together. Move them further apart.
noise/feedback.
Monitor screen is Restart your monitor and check the connection to the camera. If
frozen. the baby monitor displays the "Out of Range" message, move the
monitor closer to the camera.
n
Low batteries will cause the supply current to become unstable and will
`
affect the quality of the video/audio. Please charge the battery fully for
use for superior video.
10 · Trouble Shooting
SEP-5001RDP CU-170615.indd 10
Solution
2017/7/7 10:01:13